Multi-Tech MT9234ZBA User Manual page 15

Installing the Modem Driver in Windows XP/2003
This installation assumes a Windows XP or Windows 2003 operating system. Windows XP/2003 are identical in the
methods they use for installing modem drivers.
Part A for Windows XP/2003: Installing the USB Driver
1. Connect the USB cable between the MultiModem and the PC.
2. Insert the MultiModem productCD into your CD-ROM drive. The CD uses the Autorun feature,
and after a brief delay, the MULTIMODEM PRODUCT Setup – Welcome screen appears. Close
the Welcome screen.
In some situations the operating system will display a Found New Hardware Wizard screen and
asks you: Can Windows connect to Windows Update to search for software?
Select No, not this time. Then click Next.
3. The Found New Hardware Wizard screen now displays the MultiModem product. This is the
first of three New Hardware Wizards that will appear.
4. Click on Install from a list or specific location (Advanced), and then click Next..
Multi-Tech Systems, Inc. MT9234ZBA-USB User Guide (S000419B)
Chapter 2 - Installation
15