Definitions; Safety Notices - Hanseatic HGTI6082C147735TS User Manual

Page EN-4 Safety

Definitions

"Place setting" means a set of tableware in-
tended for use by one person, excluding serv-
ing dishes.
"Operating cycle" means a complete clean-
ing, rinsing and drying cycle, depending on
the selected programme, covering a series of
operations until the end of all activities.
"Programme duration" means the period from
the start of the selected programme, without
any preset time programmed by the user, until
the notification of the end of the programme,
from which point the user has access to the
tableware.
"Preset time" means a state in which the user
has postponed the start of the operating cy-
cle of the selected programme for a certain
period of time.

Safety notices

In this chapter, you will find general safety
notices which you must always observe for
your own protection and that of third parties.
Please also pay attention to the warnings in
individual chapters on installation and oper-
ation, etc.
Risks in handling household
electrical appliances
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■ Only use the appliance indoors. Do
not use in wet rooms or in the rain.
■ Do not operate or continue to oper-
ate the appliance if
– it exhibits visible damage, e.g. the
connection pipe is defective, the
control panel is cracked or the door
function is impaired;
– starts smoking or there is a burning
smell;
– it makes unfamiliar noises.
In these cases, you should pull the
mains plug out of the socket or switch
off/unscrew the fuse and have the
appliance repaired (see "Service" on
page EN-40).
■ The appliance corresponds to protec-
tion class I and may only be connect-
ed to a plug with a protective conduc-
tor that has been properly installed.
Ensure that the voltage is correct
when connecting it. More detailed in-
formation about this can be found on
the nameplate.
■ If the mains plug is no longer acces-
sible after the appliance has been
connected, an all-pole disconnecting