Reset To Factory Defaults; Current Status Screen - Multitech MultiDSU MTT1DSU User Manual

Data service unit

Hide thumbs Also See for MultiDSU MTT1DSU:

Table of Contents

menu. Once they are saved, these settings will be retained if the

MultiDSU happens to lose power or is turned Off.

Reset to Factory Defaults

The Configurations menu also enables you to reset the MultiDSU to the

factory defaults by selecting option 7 and pressing the ENTER key.

Selecting option 2 on the Main Menu displays the Current Status

screen which displays the line status, receive level range, and the

number of bipolar violations, framing bit errors, and out-of-sync

multiframes. This screen enables you to see if any errors have occurred,

and provides details concerning any current error status.

Current Status

Line Status

Receive Level

Bipolar Violations

Framing Bit Errors

Multiframes Out Of Sync

Press <Return> to display again or M to return to menu (M, <Return>):

:Red Alarm, Sync Loss

:-15db to -22db

:150

:1000

:10

Table of Contents

Do you have a question about the MultiDSU MTT1DSU and is the answer not in the manual?