Table of Contents
Advertisement
4. Connect the external wall transformer power supply to the
MultiDSU and plug it into a live AC outlet. When power is applied
to the unit and the on/off switch is set to the up ("1" or On) position,
the front panel LEDs will light.
5. Configure the unit in accordance with the procedures in the
Configuration section that follows in this chapter.
6. After the MultiDSU is configured for your application, the Com-
mand cable can be disconnected from the MultiDSU and the
terminal or PC and stored until the next time it is needed.
20
Advertisement
Table of Contents
Related Manuals for Multitech MultiDSU MTT1DSU
Related Products for Multitech MultiDSU MTT1DSU
- Multitech Conduit MTCDT-246A-915-US-EU-GB
- Multitech Conduit MTCDT-LEU1-246L-US-EU-GB
- Multitech Conduit MTCDT-LAT1-246A-US
- Multitech Conduit MTCDT-LVW2-246L-US
- Multitech Conduit MTCDT-LDC3-246A-JP
- Multitech Conduit MTCDT-247A-US-EU-GB
- Multitech Conduit MTCDT-H5-247L-US-EU-GB
- Multitech Conduit MTCDT-H5-247A-US-EU-GB
- Multitech Conduit MTCDT-LEU1-247L-US-EU-GB
- Multitech Conduit MTCDT-LEU1-247A-US-EU-GB
- Multitech Conduit MTCDT-LVW2-247L-US
- Multitech SocketModem MTSMC-L4E1
- Multitech MultiConnect MTC-L4G2D
- Multitech Conduit MTCDT-L4N1-246A-US
- Multitech Conduit MTCDT-L4N1-246L-915-US
- Multitech Conduit MTCDT-L4N1-246L-US
Need help?
Do you have a question about the MultiDSU MTT1DSU and is the answer not in the manual?
Questions and answers