Table of Contents
Advertisement
Firewall User Guide
8. The software is loaded onto your PC, then the Setup Complete dialog box is displayed.
Click Finish to continue. The "Do you want to run Wizard setup?" message is displayed.
Wizard Setup
The Wizard Setup screen gives you a process for adding the basic information needed to configure
your Firewall. This screen will guide you through entering the IP Address, Net Mask, and Default
Route for your Secure (private) LAN. Then you can set up for static or dynamic addressing on the
Internet LAN Port, set up the Gateway Parameters, and then do the same for the WAN port, if it is
used.
9. Click Yes to run the Wizard Setup.
Clicking No takes you to the program group (icons), where you can choose a utility from the program
group.
24
MTPSR1-120
Advertisement
Table of Contents
