Ppp; Ppp > Ppp Configuration - Multitech MTCBA-C-EN-N1 User Manual

PPP

PPP > PPP Configuration
NAT Configuration
Enable/disable NAT (Network Address Translation). The default is Enable.
NAT
If NAT is enabled:
If NAT is disabled:
Note:
effective on the fly at runtime.
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F)
•
Your LAN can use one set of IP addresses for internal traffic and a second set of
addresses for external traffic. In other words, the router with NAT does the simple IP
routing between the LAN interface and the WAN interface.
•
Your internal addresses are shielded from the public Internet.
•
The router functions without performing any address translation on the packets passing
through it.
•
Masquerading of packets originating from the LAN is disabled.
• Address translation of packets arriving from the WAN is also disabled.
•
Any DNAT Configuration previously setup in the DNAT Configuration screen is disabled.
This prevents the user from adding any DNAT rules, which if allowed would defeat the
purpose of enabling Routing.
For routing to take effect, the configuration must be saved after enabling it. It won't be
Chapter 3 – Using the Web Management Software
28