Set Time And Date; Shutdown Caution - Multitech MTCBA-C-EN-N1 User Manual

Wireless edge, gprs, cdma modems with ethernet interface

Hide thumbs Also See for MTCBA-C-EN-N1:

Table of Contents

IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART

Click the Submit button located at the bottom of most screens in order to save any changes you make.

Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take

effect. Save & Restart does not have to be executed after each screen; you can change and Submit

several screens, and then click Save & Restart.

Set Time and Date

The date and time must be set using the Web Management software.

The time and date set in IP Setup will not be correct unless SNTP client is enabled and you have a live

Internet connection. See SNTP client.

Never unplug the power until you have first performed the Save & Reset process. If the

setup changes are not properly saved before unplugging the power, data could be lost.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375F)

Chapter 2 – Getting Started

Table of Contents

Do you have a question about the MTCBA-C-EN-N1 and is the answer not in the manual?