Wilson Electronics WILSONPRO PRO 710i Installation Manual page 5

The Pro 710i industrial-class, in-building, cell
signal amplifier provides significantly enhanced
band 71 (600MHz) signal strength, supporting
4G LTE and 5G technology. The Pro 710i can
be installed as either a "stand-alone" amplifier
providing exclusive band 71 amplification, or
it can be combined with a new or existing
WilsonPro amplifier system, supporting multiple
bands. Because the Pro 710i is an industrial
class amplifier, local band 71 carrier approval
must be obtained for every installation.
The Pro 710i also incorporates Wilson Electronics' state-of-the-art XDR (eXtended
Dynamic Range) technology that prevents signal overload conditions which can, in
accordance with regulations, force the amplifier to shut down. When the Pro 710i
senses that any incoming cell signal is too strong and threatens to overload the
system, XDR automatically reduces amplifier gain to compensate while maintaining
signal coverage throughout the building. The Pro 710i incorporates an easy-to-use
color LCD screen, and both antenna ports are located on the top of the unit for simple
installation. Like all WilsonPro cell signal amplifiers, the Pro 710i amplifier system is
universal: it works for all cellular devices, and all U.S. and Canada cell phone carriers
using band 71 (600MHz).
PRO 710i INDUSTRIAL-CLASS, IN-BUILDING CELL SIGNAL AMPLIFIER
BU-GDE000257-001-060820.indd 3 BU-GDE000257-001-060820.indd 3
3
6/8/2020 4:33:07 PM 6/8/2020 4:33:07 PM