Wilson Electronics WILSONPRO PRO 710i Installation Manual page 11

Industrial-class, in-building cell signal amplifier supporting band 71 (600mhz)

Hide thumbs Also See for WILSONPRO PRO 710i:

Table of Contents

(User Interface cont.)

"OSCILLATION" is displayed in yellow, indicating a significant oscillation is occurring

and band gain has been reduced below 65 dB. Reposition antennas (increase

separation between inside and outside antennas and point in opposite directions) and

then reboot (turn the unit off, then on) the Pro 710i to reactivate Band 71 and maximize

performance. When adequate separation is achieved, the yellow color will return to

green upon reboot. Note: when the color is yellow, the band is Operational; however,

performance is reduced.

"SHUTDOWN" is displayed in red, indicating severe or repeated oscillations have

occurred and the amplifier has shut off. Reposition antennas (increase separation

between Outside and Inside Dome Antenna and point in opposite directions) and

then reboot (turn the unit off & on) the Pro 710i to reactivate Band 71 and maximize

performance. When adequate separation is achieved, the red color will return to

green upon reboot.

PRO 710i INDUSTRIAL-CLASS, IN-BUILDING CELL SIGNAL AMPLIFIER

BU-GDE000257-001-060820.indd 9

6/8/2020 4:33:17 PM

Table of Contents