Replacing The Fuses - Yamaha X MAX CZD300-A Owner's Manual

Replacing the fuses

The main fuse and the fuse boxes,
which contain the fuses for the individ-
ual circuits, are located under panel A.
(See page 9-9.)
TIP
To access the main fuse, remove the
starter relay cover as shown.
1
4
1. Fuse box
2. Main fuse
3. Spare main fuse
4. Starter relay cover
Periodic maintenance and adjustment
EAUN4020
5
4
3
2
1
1. ABS motor fuse
2. ABS solenoid fuse
3. Signaling system fuse 2
4. Terminal fuse
2
5. Ignition fuse 2
6. Signaling system fuse 1
7. ABS control unit fuse
3
8. Fuse puller
9. Spare fuse
10.Ignition fuse 1
11.Radiator fan motor fuse
12.Backup fuse
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
6 7 8
12 11 10 9
3. Turn the main switch on and turn
9-31
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
Specified fuses:
Main fuse:
20.0 A
Terminal fuse:
2.0 A
Signaling system fuse 1:
7.5 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
7.5 A
Ignition fuse 1:
7.5 A
ABS control unit fuse:
7.5 A
ABS motor fuse:
30.0 A
ABS solenoid fuse:
15.0 A
Ignition fuse 2:
7.5 A
on the electrical circuit in question
to check if the device operates.
9