Yamaha X MAX CZD300-A Owner's Manual page 29

ON
1 2
1. Push.
2. Turn.
All electrical circuits are supplied with
power, and the engine can be started.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.
3. While the smart key system indi-
cator light is on, turn the main
switch to "ON". All of the turn sig-
nal lights will flash twice and the
vehicle power will turn on.
EAU76502
TIP
z If the vehicle battery voltage is
low, the turn signal lights will not
flash.
z See "Emergency mode" on page
9-37 for information on turning the
vehicle power on without the
smart key.
OFF
1
1. Turn.
All electrical systems are off.
To turn the vehicle power off
1. With the smart key turned on and
within operating range, turn the
main switch to "OFF".
2. The turn signal lights flash once
TIP
When the main switch is turned to
"OFF" but the smart key cannot be
confirmed (the smart key is either out-
side operation range or has been
turned off), the beeper will sound for 3
seconds and the smart key system in-
dicator light will flash for 30 seconds.
EAU76511
z During this 30 seconds, the main
z After 30 seconds, the vehicle
z To turn the vehicle power off im-
OPEN (open)
Power is supplied to the main switch.
The seat and storage compartment A
can be opened.
4-8
Smart key system
and the vehicle power turns off.
switch can be freely operated.
power will turn off automatically.
mediately, push the main switch
knob four times within 2 seconds.
4
EAU79042