Power Outlet - Yamaha X MAX CZD300-A Owner's Manual

1 (a) (b)
1
2
3
4
5
3
1. Spring preload adjusting ring
2. Special wrench
3. Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
5

Power outlet

WARNING
2
To prevent electrical shock or short-
circuiting, install the cap when the
power outlet is not in use.
NOTICE
The accessory connected to the
power outlet should not be used
with the engine turned off, and the
load must never exceed 12 W (1 A),
otherwise the fuse may blow or the
battery may discharge.
This vehicle is equipped with a power
outlet located within storage compart-
ment A.
A 12-V accessory connected to the
power outlet can be used when the
main switch is in the "ON" position and
should only be used when the engine is
running.
To use the power outlet
1. Open storage compartment A.
(See page 4-8.)
2. Turn the main switch off.
Instrument and control functions
EAUN3820 3. Remove the power outlet cap.
EWAN0050
ECAN0210
1. Power outlet cap
4. Turn the accessory off.
5. Insert the accessory plug into the
1. Power outlet
6. Turn the main switch on, and then
7. Turn the accessory on.
6-33
1
power outlet.
1
start the engine. (See page 8-2.)
6