Main Switch - Yamaha X MAX CZD300-A Owner's Manual

Smart key system
NOTICE
z Use a cloth when opening the
smart key case with a screw-
driver. Direct contact with hard
objects may damage or scratch
the smart key.
z Take precautions to prevent the
4
waterproof seal from being
damaged or contaminated by
dirt.
z Do not touch the internal cir-
cuits and terminals. This may
cause malfunctions.
z Do not apply excessive force to
the smart key when replacing
the battery.
z Make sure the battery is in-
stalled correctly. Confirm the di-
rection of the positive "+" side
of the battery.
ECA15785

Main switch

1
1. Main switch
2. Main switch knob
1
1. Smart key system indicator light "
The main switch is used to turn the ve-
hicle power ON/OFF, lock/unlock the
steering, and open the seat, fuel tank
lid and storage compartment A. After
EAU76893 pushing the main switch knob and
confirmation with the smart key has
taken place, the main switch can be
turned while the smart key system indi-
cator light is on (approximately 4 sec-
onds).
2
Never turn the main switch to
"OFF", " ", or "OPEN" while the ve-
hicle is moving. Otherwise the elec-
trical systems will be switched off,
which may result in loss of control or
an accident.
TIP
Do not push the main switch knob re-
peatedly or turn the main switch back
and forth beyond normal use. Other-
wise, to protect the main switch from
damage, the smart key system will
temporarily disable and the smart key
system indicator light will flash. If this
"
occurs, wait until the indicator light
stops flashing before operating the
main switch again.
The main switch positions are de-
scribed below.
4-7
WARNING
EWA18720