Figure 22. M.2 data adapter removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install a M.2 data adapter
Use this information to install a M.2 data adapter.
Before you install a M.2 data adapter, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
2. Turn off the server. Disconnect the power cords and all external cables (see "Turn off the server" on
page 32).
To install a M.2 data adapter, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1.
Align the M.2 data adapter with the slot on the riser card; then, carefully press the M.2 data adapter
straight into the slot until it is securely seated.
Step 2.
Install the screw.
• M.2 riser assembly
.
Chapter 5
Hardware replacement procedures
45