Table of Contents
Advertisement
Compute node replacement
Use this information to remove and install a node.
Remove a compute node
Use this information to remove a compute node.
Before you remove a compute node, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
2. Turn off the server. Disconnect the power cords and all external cables (see "Turn off the server" on
page 32).
To remove a compute node, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Step 1.
Remove the five screws, and loosen the two thumb screws of the enclosure bracket.
Figure 34. Node removal
Step 2.
Remove the enclosure bracket from the server.
.
Chapter 5
Hardware replacement procedures
55
Advertisement
Table of Contents
