Table of Contents
Advertisement
Figure 42. Node installation
Step 4.
Install the five screws and fasten the two thumb screws to secure the locking bezel.
Figure 43. Node installation
After you install a compute node, complete the following steps:
1. Install the enclosure into rack if necessary.
2. Reconnect power cords and all external cables.
3. Turn on the server (see "Turn on the server" on page 32).
DIMM replacement
Use the following information to remove and install a DIMM.
Remove a DIMM
Use this information to remove a DIMM.
Attention: Memory modules are sensitive to static discharge and require special handling. In addition to the
standard guidelines for "Handling static-sensitive devices" on page 29:
ThinkAgile MX Certified Node Small FactorThinkAgile MX1021User Guide
60
Advertisement
Table of Contents
