Lenovo ThinkAgile MX User Manual page 94

Step 1. Remove the power adapter.
• If you are removing a power adapter while a node is installed in an enclosure, complete the
following steps.
1. Remove the two screws.
2. Slightly push the bracket frontward and remove it from the enclosure.
– 1U 2-node
Figure 71. Bracket removal
3. Carefully tilt the power adapter up and remove it from the cage.
– 1U 2-node
Figure 72. Power adapter removal
• If you are removing a power adapter installed in a power adapter bracket, complete the following
steps.
ThinkAgile MX Certified Node Small FactorThinkAgile MX1021User Guide
86