Install The M.2 Boot Adapter - Lenovo ThinkAgile MX User Manual

Figure 26. M.2 boot adapter removal

Install the M.2 boot adapter

Use this information to install the M.2 boot adapter.
Before you install the M.2 boot adapter, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
2. Turn off the server. Disconnect the power cords and all external cables (see "Turn off the server" on
page 32).
To install the M.2 boot adapter, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku: http://list.youku.com/albumlist/show/id_50483444
For more information about the M.2 adapter, see
.
adapters
Step 1. Align the M.2 boot adapter with the connector on the system board, and press the adapter straight
into the connector.
ThinkAgile MX Certified Node Small FactorThinkAgile MX1021User Guide
48
https://lenovopress.com/lp0769-thinksystem-m2-drives-