Installing And Removing The Ac Power Adapter Bracket - Lenovo ThinkCentre M53 Hardware Maintenance Manual

Installing and removing the ac power adapter bracket

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Note: The ac power adapter bracket is installed on the Video Electronics Standards Association (VESA)
mount bracket. The ac power adapter bracket and the VESA mount bracket are only available on some
models.
To install the ac power adapter bracket, do the following:
1. Slide the ac power adapter into the ac power adapter bracket. Ensure the ac power adapter is secured
by the bracket.
2. Align the two tabs on the ac power adapter bracket with the slots in the VESA mount bracket. Then,
slide the ac power adapter bracket as shown to install it on the VESA mount bracket.
Figure 8. Installing the ac power adapter bracket
To remove the ac power adapter bracket, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
104
ThinkCentre M53 Hardware Maintenance Manual