Figure 74. Top cover removal
Step 1.
Press on the release button and the push point at the same time; then, slide the cover toward the
rear of the server.
Step 2.
Lift the top cover away from the server.
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the top cover
Use this information to install the top cover.
To avoid possible danger, read and follow the following safety information.
S012
CAUTION:
Hot surface nearby.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the following label is attached.
S033
.
Chapter 5
Hardware replacement procedures
89