Motorola VT2442 User Manual page 76

Overview
5
Disconnect any cables connecting your computers to the router.
6
Connect one end of the blue Ethernet cable to the Ethernet port on your modem.
7
Connect the other end of the blue Ethernet cable to the blue Ethernet port labeled Internet on the rear panel
of your voice gateway.
If you connect the VT2442 directly to your cable or DSL modem, it can prioritize voice calls over data
traffic to help ensure high-quality phone service.
8
Connect one end of the yellow Ethernet cable to the Ethernet 1 port on your voice gateway.
9
Connect the other end of the yellow Ethernet cable to the Ethernet port on one computer.
10
Connect your other computers.
Hint: If you add more than four computers, you can connect your old router or a hub to one of Ethernet
ports 2, 3, or 4 on the VT2442 and connect your remaining computers to the router or hub. Be sure
only one DHCP server is running on your network. For more information, see
page 21.
11
Continue with step 8 in
VT2442 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
"Installation With a Standard Modem"
Contact
Basic Advanced TCP/IP
on page 9.
FAQ Glossary License
Wireless
"LAN Configuration" on
68