Resetting All Of Your Equipment; Replacing An Existing Router With The Vt2442 - Motorola VT2442 User Manual

Overview

Resetting All of Your Equipment

You can resolve many installation issues by resetting all of your equipment.
To reset all of your equipment:
1
Turn off your computer, VT2442 voice gateway, router (if you have one), and DSL or cable modem.
2
Turn the devices back on, one at a time, in this order:
•
Modem
•
Router (if present)
•
VT2442
•
Computer

Replacing an Existing Router with the VT2442

You can connect up to four computers directly to the VT2442 Ethernet ports. It may be easiest to have only a
single router — the one built in to your VT2442 — on your home network.
To AC power
You must connect a phone
1
Shut down your computers properly. Follow the instructions provided with the computers.
2
Unplug your cable or DSL modem power cord or adapter.
3
Unplug your router.
4
Disconnect any cables connecting your router to the modem. Please leave your modem connected to
the cable or phone line that provides your Internet connection.
Hint: Your modem should remain off for about 10 minutes to "clear its memory" so it can recognize the
VT2442 when you turn it back on. You can continue with the installation during this time.
VT2442 Voice Gateway User Guide
Installation Troubleshooting
Configuration: Basic
to the Phone 1 port
Contact FAQ
Advanced TCP/IP Wireless
Internet
Cable or DSL modem
Optional phone for a second
line ordered from Vonage
Glossary License
67