Table of Contents
Advertisement
Brake Fluid Level
Warning: Do not drive the vehicle if the brake fluid level
is below the minimum mark.
Caution: Make sure that the brake fluid does not contact
the paint work during the topping up operation. Serious paint
work damage can result. If a spillage does occur, immediately
flush any brake fluid from the paint work with clean, fresh
water and then wipe with a clean damp cloth.
The brake fluid level should read between the Min. and Max.
marks.
1. Remove the reservoir cap. Top up to the Max. level.
2. Install the reservoir cap securely.
Fluid Specifications
Fuel
Minimum 91 AKI unleaded fuel.
Recommended 93 AKI Super unleaded for optimum
performance.
Use of fuel with more than 10% ethanol is not permitted.
Engine Oil
Caution: To achieve the required high performance of
synthetic lubricants, do not mix with mineral oils.
V12 Engine
A fully synthetic 0W-20 oil meeting the specifications detailed
below can be used. No other viscosity grades or specifications are
acceptable.
Authority
API
ILSAC
Standard
SN
GF5
Maintenance and Technical Data
12.11
Advertisement
Chapters
Table of Contents
