Blind Spot Assist - Aston Martin DB11 Owner's Handbook Manual

Hide thumbs Also See for DB11:
Table of Contents

Advertisement

Sport+ Mode
Sport+ mode further increases transmission and engine
response.
The transmission is now set to use an even more
aggressive calibration than used in Sport, with the exhaust bypass
valves also revized to open at lower engine loads and speed.
Gearshifts are not done automatically from 2nd gear onwards in
Touchtronic mode, allowing the driver to hold on to individual
gears.
Both Cylinder Deactivation
1
disabled in Sport+ mode
Sport+ mode also adds a transmission temperature gauge (C) to
the left instrument cluster window.
V12 Engine Only
1.
5.12
Driving
and engine Stop/Start functions are

Blind Spot Assist

Warning: Blind Spot Assist is for visual aid only and does
not replace the need for driver awareness. It is the driver's
responsibility to be aware of their surroundings and make
sure it is safe to complete a lane change. Always make sure
that there is a suitable distance to the side of your vehicle for
other road users and obstacles.
Warning: The Blind Spot Assist system can not react to
vehicles which approach and overtake you at a greatly
different speed. In these situations, the Blind Spot Assist
system cannot provide warning to drivers. Always pay
attention to the road traffic around you.
Blind Spot Assist is used to help a driver know if a vehicle is in
their blind spot so that a lane change action can be safely
completed.
The BSA system uses two rear-facing radar units to monitor the
area up to 3.5 m (12 ft) behind your vehicle and 3 m (10 ft)
directly next to your vehicle.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents