Table of Contents
Advertisement
5.6
Driving
[1] P (PARK): Press and release to select Park when the vehicle is
stationary. The transmission will mechanically lock.
Caution: Always make sure that the park brake is ON. This
will help to make sure the vehicle will not roll.
It is not possible to select Park above 2 km/h.
[2] R (REVERSE): When stationary and with the footbrake
applied, press and release to select Reverse. When reverse is
selected, the infotainment screen will change to show the reverse
camera display.
[3] N (NEUTRAL): Press and release to select Neutral.
Caution: Do not change from Park or Neutral into Drive
or Reverse at high engine speed. Doing so can damage the
transmission or the engine.
[4] D (DRIVE): When stationary and with the footbrake applied,
press and release to select forward gears.
Vehicle Rocking Motion
If the vehicle speed is less than 4 km/h, reverse may be selected
from drive, without pressing the brake pedal, to create a vehicle
'rocking' motion i.e. to enable vehicle movement out of mud,
snow, etc. If 4 km/h is exceeded then the transmission will
automatically select Neutral.
Advertisement
Chapters
Table of Contents
