Aston Martin DB11 Owner's Handbook Manual page 147

Pairing a Device
Bluetooth must be activate on both the vehicle and the
mobile device to be used.
Before a device can be used, it must be paired to the
infotainment system.
To add a new device, select TEL from the main menu and select
Connect Device. Select Search for Phones or Search via
Telephone.
Search for Phones
The mobile device must be set to discoverable mode. Refer to
the mobile device manufacturers instructions.
Select Search for Phones to begin a search for available visible
devices. Any devices with a tick next to them have already been
paired with the infotainment system. Scroll to the required device
and press ENTER. Follow the instructions shown on the device
and the infotainment display to pair.
Search via Telephone
Select Search via Telephone to set the infotainment system to
'listen' for a device. Follow the device manufacturer's instructions
to search and connect to a new Bluetooth connection in range.
Select Aston Martin DB11 from the device list.
If the vehicle does not show, check that Bluetooth is active in
the infotainment system and search again.
Follow the instructions shown on the device and the infotainment
display to complete pairing.
7.3
Phone System