Table of Contents
Advertisement
What Do The Stalks Control?
Indicators and Headlamp Beam
Main Beam
Push the stalk for main beam headlamps. Pull the stalk back to
the initial position to return to dipped beam headlamps.
Flash Headlamps
Pull the stalk to flash the main beam headlamps.
Direction Indicators
Press up to briefly indicate a right turn and down for a left turn.
Press until the switch latches to hold the selected indicator on.
1.10
Quick Start
Wiper Controls
Rotate the wipe speed selector (A) to select a wipe speed.
[1] : Windscreen wipers OFF
[2] : Intermittent wipe (low rain sensor sensitivity)
[3] : Intermittent wipe (high rain sensor sensitivity)
[4] : Continuous wipe (slow)
[5] : Continuous wipe (fast)
[6] : Press for single wipe. Press and hold to operate the front
windscreen washers.
Advertisement
Chapters
Table of Contents
