Aston Martin DB11 Owner's Handbook Manual page 105

Hide thumbs Also See for DB11:
Table of Contents

Advertisement

Touchtronic Mode
In Touchtronic mode, gears are selected by using the paddles
located behind the steering wheel. Reverse and Park are selected
by using the PRND buttons.
While in Touchtronic mode, move to Automatic mode at any
time by pressing the D (Drive) button, or by pulling and holding
the upshift (+) paddle until Drive is selected.
Select Neutral by pulling on both the upshift and downshift
paddles at the same time.
Neutral can also be selected by pressing the N (Neutral)
button.
P (Park) and R (Reverse) are selected with the PRND buttons.
[1] : Downshift Paddle
[2] : Upshift Paddle
Pull back on either the upshift (+) or downshift (-) paddle to enter
Touchtronic mode. As the vehicle speed increases and decreases,
make upshifts and downshifts by pulling and releasing the upshift
or downshift paddle.
If no gearshift has been requested by pulling back on a paddle,
upshifts will occur automatically depending on the drive mode
as the engine speed rises or lowers to its maximum or minimum
operating limits.
If driving in a high gear, pull and hold the downshift paddle to
select the lowest available gear. For example, if in sixth gear then
second gear is selected.
When stationary, select Neutral by pulling back on both paddles
at the same time. When selecting Neutral from Park, the brake
pedal must be depressed.
When in touchtronic mode, pull back on the upshift paddle for
more than two seconds to move to automatic mode.
The instrument cluster shows the actual gear currently selected R,
D1, D2, etc and the target gear when a gearshift is in progress.
GT Mode: All Gears.
1.
Sport and Sport+: 1st to 2nd gear.
1
5.7
Driving

Advertisement

Table of Contents
loading

Table of Contents