Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all the bolts until each part is properly assembled.
Ÿ
The unit must be level to work properly. Use the included adjustable levelers to level.
Ÿ
Keep Hex Wrench as the bolts may need to be tightened in the future.
I
STEP 1
Attach Side Frame (E) to Side Frame (G) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Attach Stretchers (I) and (J) to unit with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
Flat Washers, Spring Washers and Head Cap Bolts, tightening bolts only halfway.
Assembly Instructions 2/5
Head Cap Bolt
Spring Washer
Flat Washer
I
G
Head Cap Bolt
Spring Washer
Flat Washer
H
I
E
F
Attach Side Frame (F) to Side Frame (H) with
J
Figure 1
STEP 2
Advertisement
