Open The Engine Hood - Hyundai HL970A Operator's Manual

12. OPEN THE ENGINE HOOD

12. OPEN THE ENGINE HOOD
1) The engine hood open toggle switch controls the
engine hood. It is located in tool box on the left
side of rear frame.
2) Open the access door.
※
The engine hood may not be operated when The engine hood may not be operated when
the machine's engine is running. Risk of the machine's engine is running. Risk of
machine damage. machine damage.
3) Move the toggle switch pull and up (①) in order to
open the engine hood.
4) Move the toggle switch pull and down (②) in order
to close the engine hood.
5) Hold the toggle switch until the engine hood is
fully opened or closed. Release the switch. The
switch will return to the middle position.
※
When opening the engine hood, the counter- When opening the engine hood, the counter-
weight shelf must be clear of dirt, debris or weight shelf must be clear of dirt, debris or
objects. The rear of the engine hood can be objects. The rear of the engine hood can be
damaged if the engine hood is opened with damaged if the engine hood is opened with
objects on the shelf. objects on the shelf.
※
Ensure that there are no personnel or equip- Ensure that there are no personnel or equip-
ment around the hood during operation. ment around the hood during operation.
※
Secure the engine hood in the fully raised Secure the engine hood in the fully raised
position before performing any maintenance position before performing any maintenance
work in the engine room. work in the engine room.
6) When hood is opened, cover the air intake and
the aftertreatment device outlet to prevent any
water entry.
※
Secure the hood in the fully close position or Secure the hood in the fully close position or
the fully open position prior to starting the the fully open position prior to starting the
engine. Operating the machine with the hood engine. Operating the machine with the hood
partially open can cause the exhaust to dam- partially open can cause the exhaust to dam-
age hood components. Do not allow water to age hood components. Do not allow water to
enter the aftertreatment device. enter the aftertreatment device.
Water will damage the aftertreatment device. Water will damage the aftertreatment device.
Engine hood open toggle switch
4-28
OFF master switch after lamp off
760F4OP51
Toggle switch
1
2
960A4OP50
760F4OP52