Hyundai HL970A Operator's Manual page 50

Parking and Storage
Cautions on parking
Park the machine on the flat ground as possible.
If parking the machine on a slope is unavoidable, use
wheel chocks to prevent the machine from moving.
Bring the bucket right down to the ground.
Make sure that all of the switches are turned to the 'OFF'
position.
Make sure that all of the controllers are turned to the
neutral position.
Activate the parking brake.
Stop the engine, and withdraw the ignition key.
Close and lock the windshield, door and cover completely.
Install fences around the machine when parking it on a
public road, and put up a warning sign.
Cautions on storage for a long period of time
Park the machine in accordance with the cautions for parking.
When storing the machine for a month or longer, pay
attention the following conditions to prevent deterioration of
the machine performance :
-
Thoroughly clean the machine before storing.
-
Inject sufficient lubrication oil and grease into the injection
ports.
-
If the lubrication oil is deficient, top it up. If the oil is
contaminated, change it.
-
The lubrication oil may deteriorate during storage. Pay
special attention to reusing the oil.
-
The density of the oil may drop during storage.
-
Apply an anti-rust additive to the exposed area of the
piston rod of the cylinder in areas where it is likely to rust
quickly.
-
Keep the master switch mounted in the power box (or
the toolbox on the left of the rear frame of the machine)
turned 'OFF'.
-
Top up the antifreeze in the radiator.
-
Keep the machine in a dry indoor environment.
If storing the machine outdoors is unavoidable, store it on
a wooden pallet.
-
Keep the exposed area of the piston load of the cylinder
covered.
-
Bring the attachments right down to the ground, and
keep the wheels and the track immobile by placing wheel
chocks.
1-30