22)
22)
OVERHEAD SET ADJUSTMENT
OVERHEAD SET ADJUSTMENT
※
This procedures are perform the repair shop.
This procedures are perform the repair shop.
※
Service tools
Service tools
-
Cummins barring tool, p/no. 3824591
-
Feeler gauge
(1)
Remove the capscrews.
(2)
Remove the rocker lever cover and gasket, refer
to engine maintenance manual.
(3)
Remove the plastic fuel pump drive cover locat-
ed on the front of the engine.
※
Engine coolant temperature should be less than
Engine coolant temperature should be less than
60 60 ℃ (140
(140 ℉). ).
(4)
Using the barring tool, rotate the crankshaft to
align the top dead center marks on the gear
cover and the fuel pump gear.
6-35
330A6MA100
330A6MA101
330A6MA102