Hyundai HL970A Operator's Manual page 9

2. DESCRIPTION 2. DESCRIPTION
There are several specific warning labels on this machine please become familiarized with all warn-
ing labels. Replace any safety label that is damaged, or missing. If a safety label is attached to a part
that is replaced, install a safety label on the replacement part.
1) 1) START MOTOR START MOTOR (item 1)
This warning label is positioned on the left
side of the engine hood.
Start the engine only from the operator's Start the engine only from the operator's
compartment. Never short across the compartment. Never short across the
starter terminals or across the batteries. starter terminals or across the batteries.
Shorting could bypass the engine neutral Shorting could bypass the engine neutral
start system. Shorting could also dam- start system. Shorting could also dam-
age the electrical system. age the electrical system.
2) 2) TURBOCHARGER COVER (item 2) TURBOCHARGER COVER
This warning label is positioned on the tur-
bocharger cover.
Do not touch turbocharger or it may Do not touch turbocharger or it may
cause severe burn. When the engine is cause severe burn. When the engine is
running or immediately after engine shut running or immediately after engine shut
down. down.
3) 3) HYDRAULIC OIL LEVEL (item 3) HYDRAULIC OIL LEVEL
This warning label is positioned on the left
side of hydraulic oil tank.
Place the bucket on the ground whenever Place the bucket on the ground whenever
servicing the hydraulic system. servicing the hydraulic system.
※
Check oil level on the level gauge. Check oil level on the level gauge.
※
Refill the recommended hydraulic oil up Refill the recommended hydraulic oil up
to specified level if necessary. to specified level if necessary.
4) 4) RIDE CONTROL (item 4) RIDE CONTROL
This warning label is positioned on the front
frame.
Before checking the boom operation sys- Before checking the boom operation sys-
tem, tem,
1. Bucket should be laid on the ground.
2. Turn start switch to "ON" position and
press the button on monitor to operate
ride control function.
3. Depressurize boom head by joystick.
(boom down or floating)
STOP
CAUTION
Before checking the boom operation system,
1.Bucket should be laid on the ground.
2.Turn starter switch to "ON" position and press
the button on monitor to operate
ride control function.
3.Depressurize boom head by joystick
(Boom down or Floating)
0-7
77070FW05
21070FW02
7609A0FW06
970A0FW90