Hyundai HL970A Operator's Manual page 249

(3) (3) Direction of tire to be installed Direction of tire to be installed
①
Be careful that the valve should be facing the
outside.
(4) (4) Mounting of tire Mounting of tire
①
Lightly tighten nuts as shown in the illustration.
②
Lower the jack after tire is replaced.
③
Tighten nuts according to the specified tighten
torque.
·Tightening torque : 79±2.5 kgf·m
32) 32) STORING TIRES AFTER REMOVAL STORING TIRES AFTER REMOVAL
As a basic rule, store the tires in a warehouse
which unauthorized persons cannot enter. If the
tire are stored outside, always erect a fence
around the tires and put up "No Entry" and other
warning signs that even young children can
understand.
Stand the tire on level ground, and block it secure-
ly so that it cannot roll or fall over.
If the tire should fall over, get out of the way quick-
ly. The tires for construction equipment are
extremely heavy, so trying to hold the tire may
lead to serious injury.
(571±18 lbf·ft)
6-43
18 20 1
3
16
14
12
10
8
6
4 15
2
17
19
Block
Valve
73036MI13
5
7
9
11
13
77096MI31
60 - 70°
73036MI20