Hyundai HL970A Operator's Manual page 248

31) 31) REPLACEMENT OF TIRE REPLACEMENT OF TIRE
Disassembly, reassembly, replacement and Disassembly, reassembly, replacement and
repair of tire requires special skills and equip- repair of tire requires special skills and equip-
ment. Contact a tire repair shop. ment. Contact a tire repair shop.
(1) (1)
Tires to be replaced Tires to be replaced
①
Tires with broken or bent bead wires
②
Tires exposed more than 1/4 of carcass fly.
③
Tires whose carcass is damaged more than 1/3
of the tire width.
④
Tires which show fly separation.
⑤
Tires which has a radial crack near the car-
cass.
⑥
Tires which are judged to be unsuitable for use
because of deformation or damage.
(2) (2) Separation of tire Separation of tire
①
After moving the machine to flat ground, lower
the bucket to the ground and turn the parking
brake switch ON.
②
Loosen slightly all wheel mounting.
·Tools : Socket 32 mm
Torque wrench
Extension bar
③
Lift the machine with a jack.
④
Loosen all wheel mounting nuts and replace
the tire.
Side wall
Bead
6-42
Tread
Break
Carcass
Valve
7807AMI15
770F6MI28
Torque wrench
73036MI12