Efficient Working Method - Hyundai HL970A Operator's Manual

7. EFFICIENT WORKING METHOD

7. EFFICIENT WORKING METHOD
1) 1) GENERAL GENERAL
(1) Lift the bucket about 40-50 cm (2 ft) above the
ground to ensure safety and to gain a good
range of view.
(2) Clear the jobsite and level the ground.
(3) Be careful that excessive force is not applied to
the bucket.
(4) When handling hard materials, use bucket teeth
or bolt on cutting edge.
(5) When doing dumping work, put the control lever
in the DUMP position, then return it to a former
state. Repeat this procedure until the work is
finished.
(6)
Position the machine with its back against the
wind so that dust does not get into the engine.
(7) Check if the proper bucket is used for the work.
If the capacity of the bucket exceeds that of the
machine, the machine's service life may be
shortened.
40~50cm
4-15
960A4OP10