Hyundai HL970A Operator's Manual page 39

During Operation of the Machine
Getting on and off
Do not jump on or off the machine.
Do not try to get on or off the machine while it is moving.
Get on or off the machine using the handrail and step
(or stepladder, if any). Always keep the handrail and step
clean and free from mud or oil.
Wear anti-slip shoes.
Comply with the principle of three-point contact* by
contacting the machine with either both hands and one
foot or vice versa when getting on or off the machine.
Do not sit on a seat not suited or intended for sitting.
Three-point contact means making contact with the
machine with both hands and one foot, or with one hand
and both feet.
During operation
The operator should start the engine only after sitting on
the operator's seat. Make sure that all levers are shifted to
the neutral position before starting the engine.
If there are any obstacles at the worksite, pay attention
to prevent collision of the machine with such obstacles,
particularly when turning and moving backward. Make
sure that there are no obstacles when turning and moving
backward.
When lifting a load, the capacity of the machine and
the size and weight of the object to be lifted must be
considered. Do not lift a heavy object with slings by
suspending the slings on the tooth of the bucket.
Do not allow any worker to stand under the bucket.
1-19