(8)
Using the barring tool, rotate the crankshaft 360
degrees and measure lash for rocker arms 2E,
3l, 4E, 5l, 6l and 6E. Reset the lash if out of
specification.
(9)
Place the gasket on the cylinder head. Be sure
the gasket is properly aligned around the cylin-
der head capscrews.
(10)
Install the rocker lever and capscrews.
(11)
Tighten the capscrews.
Tightening torque : 1.2 kgf · m (8.9 lbf · ft)
6-37
330A6MA105
330A6MA106
330A6MA107