Remote Introduction - Canvac Q Air CFK3301V Use Instructions

REMOTE INTRODUCTION

Airflow increase
Airflow decrease
The device can be switched on and off by pressing the ON/OFF button.
Press the Sleep mode button on the remote control. The display will show "LL"
and the airflow will be reduced. Press again to exit Sleep mode. Only works in Cool
mode; in Warm mode this button has no function. (You can also exit this mode by
pressing the Airflow increase + button.)
Press the Turbo mode button on the remote control. The display shows "HH"
and the airflow increases to maximum. Press again to exit Turbo mode. Only works in
Cool mode; in Warm mode this button has no function. (You can also exit this mode
by pressing the Airflow increase + button.)
Press the Oscillation button to turn on the oscillation function. The fan can swing
left and right 80 degrees. Press this button again to stop oscillation.
© 2022, Elon Group AB. All rights reserved.
Cool mode
Oscillation
Switch
Warm mode
Turbo mode
Timer button
Sleep mode button
Increase temperature
UV sterilization
Reduce temperature
The remote control should be
pointed at the remote control signal
receiver on the display to maximize
the remote control signal.
Effective distance 4 m
7