Control Panel - Canvac Q Air CFK3301V Use Instructions

CONTROL PANEL

Warm/Cool mode switch
button
Insert the plug into a power socket, turn on the power switch in the base and the
fan will enter standby mode:
Press the power button on the body. The buzzer will beep once and the fan will
start running.
Press and hold the power button for 2 seconds, the buzzer will beep twice, and
then stop running after you release the button.
Adjusting the airflow
When the fan is running in Cool mode, press the power button on the body to
adjust the airflow between 1 and 9.
When the fan is running in Warm mode, press the power button on the body to
adjust the airflow between 1 and 4.
Oscillating operation
Press and hold the power button for 1 second, the buzzer will beep once and the
fan will start oscillating.
Press and hold the power button for 1 second again, the buzzer will beep once and
the fan will stop oscillating.
© 2022, Elon Group AB. All rights reserved.
Power button
Display
11