Battery Installation - Canvac Q Air CFK3301V Use Instructions

BATTERY INSTALLATION AND
TROUBLESHOOTING

Battery installation

1. Open the remote control battery cover.
2. Load two new AAA (No. 7) dry batteries.
3. Close the battery cover of the remote
control.
Troubleshooting
Problem
Fan is plugged in but does not work
Remote does not work
Noise from fan or low airflow
If the above steps do not fix the fault, please contact customer service; do not
attempt to dismantle or repair the appliance yourself.
© 2022, Elon Group AB. All rights reserved.
Please insert the battery correctly
Check
Is the plug properly inserted into the
socket?
Is the battery dead?
Is the battery installed correctly?
Is the remote control pointed at the
signal receiver?
Check air purifying filter; if full of dust,
clean or replace.
Battery cover
13