Warm Mode Instructions - Canvac Q Air CFK3301V Use Instructions

10

WARM MODE INSTRUCTIONS

GB
Press the Warm mode button and the display will show the ambient temperature.
Press the temperature button to set the temperature; the display will flash and you
can now set the temperature to between 1 and 30°C.
The set temperature should be higher than the ambient temperature, otherwise
the heater will not turn on.
When the ambient temperature reaches the set temperature, the heating function
will stop and the airflow will be reduced to the minimum setting.
When the ambient temperature drops below the set temperature, the heating
function will automatically be reactivated.
Set temperature > ambient temperature: heating function on.
Set temperature ≤ ambient temperature: heating function stops.
Note: The default setting temperature is 25°C. In Warm mode, when the ambient
temperature is below 0°C, the display only shows 01; it does not display a negative
temperature value. The appliance will only run for 12 hours in Warm mode, and will
then turn off automatically. Restart by pressing the power button or by using the
remote control.
Ambient Temperature
23°C
Set Temperature
25°C
© 2022, Elon Group AB. All rights reserved.