Muse M-600BT - Wireless Portable Bluetooth Speaker Manual

LOCATION AND DESCRIPTION OF CONTROLS

1. Speakers
2. Bluetooth LED light
3. Bluetooth pairing /PLAY/ PAUSE
4. Volume down
5. Volume up
6. Receive call/ Transfer call/ Redial call
7. Reject call/ Hang up call
8. Charging LED light (Red: charging, Green: charging completed)
9. POWER Switch(ON/OFF)
10. AUX IN jack
11. DC input(AC adaptor jack)
12. Battery compartment
13. RESET
14. MICRO

POWER SUPPLY

AC adaptor: Input 100-240V ~, 50/60Hz, 0.2A, output 5 V ,0.5A.
Speaker input: 5 V , 500mA
Speaker internal rechargeable Lithium-ion Polymer battery 3,7V, 800 mAh.

• The included AC adapter is exclusively intended to be used with this device
• Turn off the power before unplugging the AC adapter to avoid damaging the device.
• In case of unused for long periods, unplug the AC adapter from the outlet.
• Place the unit near the outlet and make sure it is easily accessible. If a malfunction occurs, immediately disconnect the unit from the wall outlet.
• The adapter enables you to unplug the unit. It must be easily accesible during use.
• To completely turn off power, unplug the adapter from the wall outlet.* Never use a damaged power adapter. Place the power cord safely and so that you do not pinch or crush it. If the cable is damaged, contact a repair service

Using the built-in battery
This unit is equipped with a rechargeable lithium-ion polymer battery. Charge this battery for at least 4 hours before using the device for the first time (same time for a depleted battery) The indicator light changes from red to green when the battery is fully charged. This battery can be recharged at any time independently of the fact that it is completely loaded or not.

• The integrated battery can be recharged when the unit is in "Off". Use only the supplied AC adapter.
• Charge the internal battery only when you are ready to re-use the device again.
• When using the device in battery, the ambient temperature must be 5°C (41°F) at 35°C (95°F)
• For a longer service life it is recommended to charge the battery indoor
• The integrated battery of this device may present a risk of fire or chemical burn if mistreated.
• The unit must not be exposed to excessive heat such as sunshine, fire or similar heat source

PAIRING & LINKING OPERATION

1. Turn off the Bluetooth functionality of other devices that were paired with your unit.
2. Slide POWER switch to ON(turn right) position.
3. Turn on Bluetooth functionality on your Bluetooth device. Typcally, Bluetooth controls are found on the device's tools or settings menu (see your user manual). Turn on Bluetooth connectivity and make your device "discoverable".
4. Press and hold the "Play" button for 5 seconds till Bluetooth light flash in blue quickly to put the unit in pairing mode. If you power on the unit and wait for 20 seconds, it can also goes to pairing mode automatically.
5. Choose "add a new Bluetooth device" or "setup Bluetooth device" on your device. It will start to search. If the pairing attempt fails or times out (after 3 minutes), the unit will standby. Power it on again and start pairing procedure again (see steps 2 - 4).
6. After your device and the "Bluetooth Speaker" have discovered each other, a "Pairing Successful" or similar message should appear on your device and the blue light will flash slowly. If your device prompts you for a pass code, please enter 0000. On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose "Use as Audio Device (stereo)" or similar.
7. Pairing remains intact when the unit and/or the Bluetooth device is taken out of link range. To re-establish an active connection when your Bluetooth device returns within range.
8. Under the condition of step 7, the next time the unit is powered on it will automatically try to re-establish a link with the most recently linked Bluetooth device. If your device does not support auto-linking OR was not the last linked to the unit, you must relink manually by selecting "Bluetooth Speaker" from the Bluetooth device's menu on your Bluetooth device.

Play music from Bluetooth devices

Make sure the Bluetooth connection between the unit and the device is active.

1. To start play, presson unit.
2. To pause/resume play, pressagain.

Note: the Bluetooth light in blue will remain lit when music is playing.

Play from an external device

You can also listen to an external audio device through this unit.

1. Connect the Aux-in link cable(not supplied) to:

• the AUX IN jack (3.5mm) on the back of the unit, the light will turn AMBER color once the cable connected with the unit.
• the headphone jack on an external device.

2. Start to play the device.

Note: please unplug the Aux-in link cable if you don't want to play with it.

Adjust volume level

During play, press +/- to increase/decrease the volume level.

* Sometimes volume adjustment made on your device will also affect volume output from the speaker.

Note: In On mode, unit goes to standby mode if there is no any operation within 15 minutes.

MAKING CALLS AND ANSWER CALLS

Before making a call used with your mobile phone, you need to pair and link your Bluetooth-enabled phone with the unit.

Answer a Call:

1. To receive the incoming call, press button.
2. To end the call, press theButton.

TRANSFER THE CALL BETWEEN MOBILE PHONE AND THE UNIT

During the talking mode, you can pressbutton to transfer the phone call between the mobile phone and the unit.

Re-dialing:
To redial the last dialed number, press theButton twice.

Note re-dialing function is unavailable if there has without any dial record on your mobile phone.

"REJECT/END CALL" function can be activated when:

1. End up the calling.
2. Cancel the outgoing call.
3. Reject the incoming call.

WEAK BATTERY ALARM

If the battery is weak, "Ding...Ding...Ding..." sound will alert intermittently during music playback and Bluetooth LED light will flash amber 2 times every 20 seconds which it remind you that the battery life will not last to playing.

TROUBLE SHOOTING GUIDE

• This unit will not operate or may operate improperly with some Bluetooth mobile phones / audio players.
• There are many mobile phones in the market. We cannot guarantee the compatibility of all mobile phones together with the unit. - If you found the conversation is not clear, try to move closer to the mi-crophone.
• Never expose the product to fire as this could result in personal injury.
• Do not store the product in extremely cold or warm environments.
• Never dismantle the product.
• Never let children play with the product.
• Do not expose the product to dampness or moisture
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

SPECIFICATIONS

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Elec-tr-onic Equipment Directive.)