Wiring Diagram; Specifications; Environmental Disposal - Nakayama PRO SP6200 User Manual

EN

WIRING DIAGRAM

Single phase with capacitor
connection demonstration
Three phase with six cable Y
connection demonstration
Connections for across-the-line
starting, running, and any reduced
voltage starting except WYE-DELTA
type starters.

SPECIFICATIONS

Technical Data
SP6200
Model
Voltage/Frequency 230 V / 50 Hz
Input power 1,5 Hp
Total height 1016mm

ENVIRONMENTAL DISPOSAL

In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
6
Single phase with built-in capacitor
connection demonstration
Three-phase motor lead identification
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and safety
of the products. The parts described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair
or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
WWW.NIKOLAOUTOOLS.GR
Three phase with three cable
connection demonstration
Three phase with six cable
connection demonstration
WYE-DELTA starters connect the
motor as shown below during
starting, then change to the running
connection shown at the left.