Attaching The Standard Case To The Mobility Head Unit - HP Engage Go 10 User Manual

4. Adjust the voltage select switch behind each serial port to the setting that you want.
5. Place the bottom plate onto the I/O connectivity base (1), and then secure the plate to the I/O
connectivity base with the five screws (2).
6. Reconnect the I/O connectivity base power cord and peripheral devices.

Attaching the standard case to the mobility head unit

You can help protect your mobility head unit from accidental drops and bumps with the optional standard
case. You can also attach a shoulder strap to the case for hands-free use.
To attach the case:
1. Remove the mobility head unit from the dock if it is attached.
NOTE:
bump.
The case ships with a filler piece. Remove the piece for installation onto models with a payment
Attaching the standard case to the mobility head unit 19