Uninterruptible Power-Supply Environment Requirements; 2145 Ups-1U Environment; Dimensions And Weight; Additional Space Requirements - IBM 2145-CF8 Hardware Installation Manual

The redundant ac-power switch comes with two IEC 320-C19 to C14 power cables
to connect to rack PDUs. There are no country-specific cables for the redundant
ac-power switch.
The power cable between the redundant ac-power switch and the 2145 UPS-1U is
rated at 10 A.
Redundant ac-power switch specifications
The following tables list the physical characteristics of the redundant ac-power
switch.

Dimensions and weight

Ensure that space is available in a rack that is capable of supporting the redundant
ac-power switch.

Additional space requirements

Ensure that space is also available in the rack for the side mounting plates on
either side of the redundant ac-power switch.
Heat output (maximum)
The maximum heat output that is dissipated inside the redundant ac-power switch
is approximately 20 watts (70 Btu per hour).

Uninterruptible power-supply environment requirements

An uninterruptible power-supply environment requires that certain specifications
for the physical site of the SAN Volume Controller must be met.

2145 UPS-1U environment

All SAN Volume Controller models are supported with the 2145 UPS-1U.
2145 UPS-1U specifications
The following tables describe the physical characteristics of the 2145 UPS-1U.
2145 UPS-1U dimensions and weight
Ensure that space is available in a rack that is capable of supporting the 2145
UPS-1U.
44
IBM System Storage SAN Volume Controller: Model 2145-CF8 Hardware Installation Guide
Height Width
43 mm (1.69 in.) 192 mm (7.56 in.)
Location
Left side
Right side
Depth
240 mm
Width
124 mm (4.89 in.)
124 mm (4.89 in.)
Maximum weight
2.6 kg (5.72 lb)
Reason
Side mounting plate
Side mounting plate