Power Cables For The 2145 Ups-1U - IBM 2145-CF8 Hardware Installation Manual

Height
44 mm
(1.73 in.)
Note: The 2145 UPS-1U package, which includes support rails, weighs 18.8 kg (41.4 lb).
Heat output
The 2145 UPS-1U unit produces the following approximate heat output.
Model
2145 UPS-1U

Power cables for the 2145 UPS-1U

If you do not connect the 2145 UPS-1U to a rack power-distribution unit (PDU) or
redundant ac-power switch, you must follow your country or region's power
requirements to choose the appropriate power cable for the 2145 UPS-1U.
The 2145 UPS-1U is supplied with an IEC 320-C13 to C14 jumper to connect it to a
rack PDU. You can also use this cable to connect the 2145 UPS-1U to the redundant
ac-power switch.
The following table lists the power cable options for your country or region.
Country or region
United States of America (Chicago),
Canada, Mexico
Bahamas, Barbados, Bermuda,
Bolivia, Brazil, Canada, Cayman
Islands, Colombia, Costa Rica,
Dominican Republic, Ecuador, El
Salvador, Guatemala, Guyana, Haiti,
Honduras, Jamaica, Japan, Korea
(South), Liberia, Mexico,
Netherlands Antilles, Nicaragua,
Panama, Peru, Philippines, Saudi
Arabia, Suriname, Taiwan, Trinidad
(West Indies), United States of
America, Venezuela
Width Depth
439 mm 579 mm
(17.3 in.) (22.8 in.)
Heat output during normal
operation
10 W (34 Btu per hour)
Length
1.8 m (6 ft)
2.8 m (9 ft)
Appendix B. SAN Volume Controller physical installation planning
Maximum weight
16 kg
(35.3 lb)
Heat output during battery
operation
150 W (512 Btu per hour)
Connection type
(attached plug
designed for 200
- 240 V ac
input) Part number
NEMA L6-15P 39M5115
NEMA L6-15P 39M5116
45