Table of Contents
Advertisement
Administrator Information
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Device Management tab > Export and Import Setting Value > Import
4. Select the exported file, and then enter the encrypted password.
5. Click Next.
6. Select the settings that you want to import, and then click Next.
7. Click OK.
The settings are applied to the printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 148
&
Advanced Security Settings
This section explains advanced security features.
Security Settings and Prevention of Danger
When a printer is connected to a network, you can access it from a remote location. In addition, many people can
share the printer, which is helpful in improving operational efficiency and convenience. However, risks such as
illegal access, illegal use, and tampering with data are increased. If you use the printer in an environment where
you can access the Internet, the risks are even higher.
For printers that do not have access protection from the outside, it will be possible to read the print job logs that
are stored in the printer from the Internet.
In order to avoid this risk, Epson printers have a variety of security technologies.
Set the printer as necessary according to the environmental conditions that have been built with the customer's
environment information.
Name
Control of protocol
>
Advanced Security Settings
Feature type
Controls the protocols and
services to be used for
communication between
printers and computers, and
it enables and disables
features.
>
Security Settings and Prevention of Danger
What to set
A protocol or service that is
applied to features allowed or
prohibited separately.
193
What to prevent
Reducing security risks that
may occur through
unintended use by
preventing users from using
unnecessary functions.
Advertisement
Table of Contents
