Dell EMC PowerEdge T350 3RRTM Installation And Service Manual page 14

Figure 4. Rear view of the system with cable PSU
Table 4. Rear view of the system
Item Ports, panels, or slots
1 Cabled power supply unit
2 PCIe expansion card
slots (4)
3 USB 2.0 port (4)
4 System identification
button
14 PowerEdge T350 system overview
Icon Description
Enables you to connect to AC power source. For more information about
the PSU configurations, see the Dell EMC PowerEdge T350 Technical
Specifications on product documentation page.
N/A Enables you to connect PCI Express expansion cards. For more
information about the expansion cards supported on your system, see the
expansion card installation guidelines
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID button
is enabled in the iDRAC setup.
section.