Table of Contents
Advertisement
Figure 85. Removing the power interposer board
Next steps
1.
Replace the power interposer board
Installing the power interposer board
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the power supply
4.
Remove the air
shroud.
Steps
1. To install power interposer board (PIB), align the PIB at an angle with the hooks on the system.
2. Slide the PIB towards the front of the system until it snaps into place.
(PIB).
Safety
instructions.
Before working inside your
units.
system.
Installing and removing system components
95
Advertisement
Table of Contents
